Show Netsec Traffic - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show netsec traffic

Displays anomaly specific traffic statistics.
show netsec [group {group-name | all} | port slot/port1[-port2]] [anomaly {anomaly_name | all}] traffic
Syntax Definitions
group-name
group all
slot/port1
-port2
anomaly_name
anomaly all
Defaults
By default, a list of all anomalies traffic is displayed.
Platforms Supported
OmniSwitch 6850, 6850E, 6855, 9000E
Usage Guidelines
To display trafffic for a particular monitoring-group, specify only the group parameter.
Examples
-> show netsec anomaly all traffic
Slot
Port Anomaly
----+----------------+-----------+---------+------------+----------+-----------
2/5 arp-addr-scan
2/5 arp-addr-scan
2/5 arp-flood
2/5 arp-flood
2/5 arp-failure
2/5 arp-failure
2/5 icmp-addr-scan
2/5 icmp-addr-scan
2/5 icmp-flood
2/5 icmp-flood
2/5 icmp-unreachable icmp-dnr
2/5 tcp-port-scan
2/5 tcp-port-scan
2/5 tcp-port-scan
2/5 tcp-addr-scan
2/5 tcp-addr-scan
page 38-10
The name of the monitoring-group.
Specifies all the monitoring-groups.
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to configure on
the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
The type of the anomaly.
Monitors all anomalies.
Packet Curr-in
arp-rep -
arp-req 0
arp-rep 0
arp-req 0
arp-rep -
arp-req 0
icmp-rep -
icmp-req 0
icmp-rep -
icmp-req 0
0
syn-only 0
syn-ack 0
rst 0
syn-only 0
syn-ack -
Network Security Commands
Curr-out Last-in
0 -
- 0
0 0
- 0
0 -
- 0
0 -
- 0
0 -
0 0
0 0
0 0
0 0
0 0
- 0
0 -
OmniSwitch CLI Reference Guide
Last-out
0
-
0
-
0
-
0
-
0
0
0
0
0
0
-
0
June 2012