Show Router Ldp Bindings Active - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MPLS LDP Commands

show router ldp bindings active

Displays the LDP bindings for active IP prefixes.
show router ldp bindings active [prefix ip-prefix/mask]
Syntax Definitions
ip-prefix
mask
Defaults
By default, active LDP bindings are displayed for all prefixes.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the optional prefix parameter to display active bindings for a specific prefix.
Examples
->show router ldp bindings prefix 10.11.0.6/32
LDP LSR ID: 10.11.0.66
Legend: U - Label In Use,
LDP Prefix Bindings
Prefix
------------------+---------------+-------+------+-------------+---------------
10.11.0.6/32
No. of Prefix Bindings: 1
output definitions
Prefix
Peer
IngLbl
EgrLbl
EgrIntf/LspId
EgrNextHop
OmniSwitch CLI Reference Guide
The IP address prefix used to identify the IP network. Specify 0 for the
host bits.
The IP address mask used to identify the subnet address within the IP
address prefix.
N - Label Not In Use
Peer IngLbl
10.10.0.7 131069N 131069
The IP network address and mask used to identify the prefix binding.
The IP address of the LDP peer.
The ingress LDP label.
The egress LDP label.
The Label Switch Path (LSP) tunnel ID number (not the LSP path ID
number).
The next hop IP address for the egress label.
June 2012
EgrLbl EgrIntf
--
EgrNextHop
55.55.55.77
page 48-47