Show User - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show user

Displays information about all users or a particular user configured in the local user database on the
switch.
show user [username]
Syntax Definitions
username
Defaults
By default, all users are displayed if the username parameter is not specified with this command.
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
Use this command to display information about read/write access and partitioned management access
(domains and families) or end-user profiles associated with users.
Examples
-> show user
User name = Customer1,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
Read Only for domains
Read/Write for domains
Read/Write for families = ip rip ospf bgp vrrp ip-routing ipx ipmr ipms ,
Snmp allowed
Snmp authentication
Snmp encryption
Console-Only
User name = admin,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
Read Only for domains
Read/Write for domains
Snmp allowed
Console-Only
User name = j_smith,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
END user profile
Snmp allowed
page 36-118
The name of the user. Used for logging into the switch.
= 10/27/2007 11:01 (30 days from now),
= Yes (Automatically unlocked after 19 minute(s)from now),
= 3,
= None,
= Admin System Physical Layer2 Services policy Security ,
= YES,
= SHA,
= DES
= Disabled
= 10/27/2007 11:01 (30 days from now),
= None,
= 0,
= None,
= All ,
= NO
= Disabled
= 10/27/2007 11:01 (30 days from now),
= Yes (Automatically unlocked after 19 minute(s)from now),
= 3,
= u_profile1,
= YES,
= 9/30/2007 10:59 (3 days from now),
= 9/30/2007 10:59 (3 days from now),
= 9/30/2007 10:59 (3 days from now),
OmniSwitch CLI Reference Guide
AAA Commands
June 2012