Configure Service Vpls Mesh-Sdp Shutdown - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Virtual Private LAN Service (VPLS) Commands

configure service vpls mesh-sdp shutdown

Enables or disables the administrative status of the specified mesh-SDP binding.
configure service vpls service-id mesh-sdp sdp-id[:vc-id] {no shutdown | shutdown}
Syntax Definitions
service-id
sdp-id
vc-id
no shutdown
shutdown
Defaults
By default, the administrative status of the mesh–SDP binding is disabled.
parameter
vc-id
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Administratively disabling a VPLS–SDP binding does not remove the binding configuration from the
router.
Examples
-> configure service vpls 10 mesh-sdp 100 no shutdown
-> configure service no mesh-sdp 100 shutdown
Release History
Release 6.4.2; command was introduced.
OmniSwitch CLI Reference Guide
An existing VPLS ID number.
An existing SDP ID number to bind to the specified service ID number.
A VC ID number used to validate the VC ID portion of each mesh SDP
binding defined for the service.
Enables the VPLS–SDP binding.
Disables the VPLS–SDP binding.
default
service-id value
June 2012 page 50-43