Show Power - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show power

Displays the hardware information and current status for chassis power supplies.
show power [supply] [number]
Syntax Definitions
supply
number
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E.
Usage Guidelines
•
When the show power command is entered on stackable switches, information is displayed only for
power supplies that are installed in the chassis and powered on. If a power supply is present in a power
supply bay, but the power supply is unplugged or its on/off switch is in the off position, the power
supply is not listed in the command output.
•
On OmniSwitch chassis-based switches, power supplies are numbered from top to bottom. For
example, a power supply installed in the top position in the chassis is Power Supply 1, or PS-1.
•
On OmniSwitch chassis-based switches, power supplies are numbered from left to right. For detailed
slot numbering information, see the "Chassis and Power Supplies" chapter of your Hardware Users
Guide.
Examples
-> show power
Slot PS Wattage
----+----+---------+------+-----------+----------
1 600
2 600
3 --
4 600
5 600
6 600
7 600
-> show power 5
Module in slot PS-5
(Power Shelf slot 5)
Model Name:
Description:
Part Number:
page 54-48
Optional command syntax.
The single-digit number for a specific power supply installed in the
chassis. If no power supply number is specified, information for all
power supplies is displayed.
Type Status Location
AC UP Internal
AC UP Internal
-- -- --
IP UP External
IP UP External
IP UP External
IP UP External
OS-IPS-600A,
ILPS AC,
902252-10,
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide June 2012