Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2898

output definitions
Ingr Bw Sharing
Inner Tag Option
Priority Mapping
Priority Value
Release History
Release 6.3.1; command was introduced.
Release 6.4.2; Egr (egress bandwidth) field added along with Ingr (ingress bandwidth) field.
Release 6.4.3; NA used to indicate bandwidth/priority values for the profile are not assigned.
Related Commands
ethernet-service sap-profile
ethernet-service sap
ethernet-service sap sap-profile
show ethernet-service sap
MIB Objects
alaEServiceSapProfileTable
alaEServiceSapProfileID
alaEServiceSapProfileCVLANTreatment
alaEServiceSapProfilePriorityMapMode
alaEServiceSapProfileFixedPriority
alaEServiceSapProfileIngressBW
alaEServiceSapProfileEgressBW
alaEServiceSapProfileBandwidthShare
page 44-48
The status of bandwidth sharing (enable, disable, or NA). If enabled,
the ingress bandwidth value is shared across all SAP ports and
CVLANs. If disabled, the bandwidth value is not shared and applied to
individual SAP ports and CVLANs. If NA displays in this field, the
bandwidth value for the profile is not assigned.
Indicates how the CVLAN tag is processed (translate or preserve). If
set to preserve, the CVLAN tag is retained and the SVLAN is added to
the frame. If set to translate, the CVLAN tag is changed to the SVLAN
tag.
Indicates how the priority value is configured for the SVLAN (in-ou,
fixed, or NA). If set to in-out, the CVLAN priority value is mapped to
the SVLAN. If set to fixed, a user-specified priority value is used for
the SVLAN priority. If set to NA, the priority for the profile is not
assigned.
Indicates the priority value mapped to the SVLAN (a number, P, DSCP,
or NA). A number indicates a fixed, user-specified value is used; P
indicates the CVLAN 802.1p bit value is used; DSCP indicates the
CVLAN DSCP value is used; NA indicates the priority value for the
profile is not assigned.
Creates a profile for a VLAN Stacking Service Access Point (SAP).
Creates a VLAN Stacking SAP and associates the SAP with a service
and SAP profile.
Specifies a different SAP profile for the SAP.
Displays configuration information for VLAN Stacking SAPs.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide June 2012