CMM Commands
usb
Enables access to the device connected to the USB port.
usb {enable | disable}
Syntax Definitions
N/A
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Must use an Alcatel-Lucent certified USB device.
•
If a Alcatel-Lucent certified USB device is connected after enabling the USB interface, the device will
be automatically mounted as /uflash.
•
Once mounted, common file and directory commands can be used for file managment.
Examples
-> usb enable
-> cp /flash/working/boot.cfg /uflash/boot.cfg
-> ls /uflash
Release History
Release 6.4.3; command was introduced.
Related Commands
MIB Objects
usb auto-copy
systemServices
systemServicesUsbEnable
OmniSwitch CLI Reference Guide
default
disable
Allows backup image files from the USB device to be automatically
copied to the /flash/working directory on the switch immediately after
the USB device is connected
June 2012
page 53-27