Ethoam Domain Id-Permission - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ethoam domain id-permission

Configures the ID-permission value for MD entry.
ethoam domain name id-permission {none | chassisid}
Syntax Definitions
name
none
chassisid
Defaults
parameter
none | chassisid
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Domain must be created before it is modified.
Examples
-> ethoam domain MD id-permission chassisid
Release History
Release 6.4.3; command was introduced.
Related Commands
show ethoam default-domain
configuration
show ethoam domain
MIB Objects
dot1agCfmMdTable
dot1agCfmMdName
dot1agCfmMdIdPermission
page 45-8
Specifies the domain name used while creating the management domain
for which this management association is created.
Sender ID TLV is not to be sent.
Chassis ID Length, Chassis ID Subtype and Chassis ID TLV are to be
present.System name shall be filled as Chassis ID.
default
none
Displays the values of scalar Default-MD objects.
Displays the information of a specific Management Domain config-
ured on the bridge.
Ethernet OAM Commands
OmniSwitch CLI Reference Guide June 2012