Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3251

Virtual Private LAN Service (VPLS) Commands
-> show service port linkagg 19
Port Table
Port Admin
Id Status Status
-------+------+------+------+------+-----+-----+--------------------------------
0/19 Up Up
Number of Ports : 1
output definitions
Port Id
Admin Status
Link Status
Cfg MTU
Oper MTU
Port Mode
Port Encp
L2Profile
Release History
Release 6.4.2; command was introduced.
Related Commands
show service l2profile
show service sap-using
show service id sap
MIB Objects
alaServiceMgrAccessPortTable
alaServiceMgrPortID
alaServiceMgrPortMode
alaServiceMgrPortEncapType
alaServiceMgrPortProfileId
OmniSwitch CLI Reference Guide
Link Cfg Oper
MTU MTU
9212 9212
The access port number or link aggregate ID number.
The administrative status (Up or Down) of the access port.
The status of the link connection to the access port (Up or Down).
The configured MTU value for the access port.
The operational MTU value for the access port.
The port mode (accs) indicates that the port is a service access port.
Configured through the
mand.
The encapsulation type associated with the access port. Configured
through the
The name of the Layer 2 profile associated with the access port. Con-
figured through the
Displays the Layer 2 profile configuration for the router.
Displays the Service Access Point (SAP) configuration for the local
router.
Displays configuration information about the Service Access Points
(SAPs) associated with the specified service.
June 2012
Port Port L2Profile
Mode Encp
accs null def-access-profile
configure service port mode access
configure service port encap-type
configure service port l2profile
com-
command.
command.
page 50-77