Swlog Remote Command-Log - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

swlog remote command-log

Enables or disables remote command logging.
swlog remote command-log {enable | disable}
Syntax Definitions
N/A
Defaults
By default, switch logging is disabled.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> swlog remote command-log enable
-> swlog remote command-log disable
Release History
Release 6.3.4; command was introduced.
Related Commands
swlog output
show log swlog
show swlog
MIB Objects
systemSwitchLoggingGroup
systemSwitchLoggingEnable
page 51-8
Enables or disables switch logging output to the console, file, or data
socket.
Displays stored switch logging information from flash.
Displays switch logging information.
Switch Logging Commands
OmniSwitch CLI Reference Guide June 2012