Show Netsec Summary - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Network Security Commands

show netsec summary

Displays the anomaly check summary.
show netsec [group {grp_name | all} | port slot/port[-port2]] [anomaly {anomaly_name | all}] summary
Syntax Definitions
grp_name
group all
slot/port
-port2
anomaly_name
anomaly all
Defaults
By default, a list of all anomalies is displayed.
Platforms Supported
OmniSwitch 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the anomaly and group parameters to list the summary of a particular anomaly that belongs to the
specified monitoring-group.
•
The following table show the list of anomalies:
anomaly name
arp-addr-scan
arp-flood
arp-failure
icmp-addr-scan
icmp-flood
icmp-unreachable
tcp-port-scan
tcp-addr-scan
syn-flood
syn-failure
OmniSwitch CLI Reference Guide
The name of the monitoring-group whose member-ports statistics are
required.
Specifies all the monitoring-groups.
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to display on the
same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
The type of the anomaly.
Monitors all anomalies.
June 2012 page 38-7