Efm-Oam Errored-Frame-Seconds-Summary - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

LINK OAM Commands

efm-oam errored-frame-seconds-summary

Configures the threshold, window and notify-status for errored-frame-seconds-summary on a port. The
Errored Seconds are the time in seconds in which at least one frame error has occurred.
efm-oam port slot/port[-port2] errored-frame-seconds-summary [threshold threshold_seconds]
[window window_seconds] [notify {enable | disable}]
Syntax Definitions
slot/port
-port2
threshold_symbols
window_seconds
enable
disable
Defaults
parameter
threshold_symbols
window_seconds
enable | disable
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855.
Usage Guidelines
•
The various options, threshold, window and notify can be issued in any order. However, at least one
option has to be entered.
•
To enter many ports in a single command, use a hyphen to specify a range of ports (e.g. 3/1-16).
Examples
-> efm-oam port 1/1 errored-frame-seconds-summary threshold 1 window 700 notify
enable
-> efm-oam port 1/1 errored-frame-seconds-summary notify disable
-> efm-oam port 2/1-4 errored-frame-seconds-summary threshold 1 window 700 notify
enable
-> efm-oam port 2/1-2 errored-frame-seconds-summary notify disable
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (e.g. 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to configure on
the same slot (e.g 3/1-4 specifies ports 1,2,3, and 4 on slot 3).
Specifies the frame error threshold number.
Specifies the window of time in which the frame errors will be
measured.
Enables notification of the Errored Frame Seconds Summary event.
Disables notification of the Errored Frame Seconds Summary event.
default
1 errored frame second
60 seconds. (600 dsec).
enable
June 2012 page 46-21