system date
Displays or modifies the switch's current system date.
system date [mm/dd/yyyy]
Syntax Definitions
mm/dd/yyyy
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
If you do not specify a new system date in the command line, the current system date will be displayed.
•
For more information on setting time zone parameters (e.g., Daylight Savings Time), refer to the
system timezone command on page
Examples
-> system date 08/08/2005
-> system date
08/08/2005
Release History
Release 6.1; command was introduced.
Related Commands
system time
system timezone
MIB Objects
systemServices
systemServicesDate
page 54-6
The new date being specified for the system. Enter the date in the
following format: mm/dd/yyyy, where mm is the month, dd is the day,
and yyyy is the year. For example, 08/08/2005.
54-9.
Displays or modifies the switch's current system time.
Displays or modifies the time zone for the switch.
Chassis Management and Monitoring Commands
OmniSwitch CLI Reference Guide
June 2012