Port Mapping Dynamic-Proxy-Arp - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

port mapping dynamic-proxy-arp

Enables or disables the dynamic proxy arp functionality for the port mapping session.
port mapping session id dynamic-proxy-arp {enable | disable}
Synatax Definitions
session id
enable
disable
Defaults
parameter
enable | disable
Platform Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Clients must be connected to the user-ports and the head end routers connected to the network-ports of
the port mapping session for dynanic proxy arp to function properly.
•
DHCP snooping must be enabled for dynamic proxy arp to function.
•
Using dynamic-proxy-arp in conjunction with DHCP snooping allows for the configuation of the MAC
Forced Forwarding feature.
Examples
-> portmapping 1 dynamic-proxy-arp enable
-> portmapping 1 dynamic-proxy-arp disable
Release History
Release 6.4.3; command was introduced.
page 39-10
The port mapping session for which the dynamic proxy arp status is to
be configured.
Enables the dynamic proxy arp status.
Disables the dynamic proxy arp status.
default
disable
Port Mapping Commands
OmniSwitch CLI Reference Guide June 2012