Learned Port Security Commands
Related Commands
port-security
port-security mac
port-security mac-range
port-security shutdown
port-security maximum
MIB Objects
learnedPortSecurityTable
lpsRelease
OmniSwitch CLI Reference Guide
Enables or disables Learned Port Security (LPS) on the switch port(s).
Configures a single authorized source MAC address for a port that
belongs to a specified VLAN.
Configures a list of authorized MAC addresses by defining a range of
addresses allowed on the port.
Configures the amount of time in minutes to allow source learning on all
LPS ports. Also, enables or disables the conversion of dynamic MAC
addresses to static MAC addresses on LPS ports.
Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
June 2012
page 40-19