802.1X Auth-Server-Down Re-Authperiod - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

802.1x auth-server-down re-authperiod

Configures the amount of time to wait before re-authentication is attempted for devices that were classi-
fied by the authentication server down policy.
802.1x auth-server-down re-authperiod {value}
Syntax Definitions
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
This timer only applies to devices that were classified by the authentication server down policy. This
policy classifies devices whenever RADIUS servers become unreachable.
•
This command sets the time interval for all 802.1x-enabled ports on the switch.
Examples
-> 802.1x auth-server-down re-authperiod 500
Release History
Release 6.4.2; command was introduced.
Related Commands
802.1x auth-server-down policy
show 802.1x auth-server-down
MIB Objects
alaDot1xAuthSvrTimeoutReAuthPeriod
page 35-44
The value of re-authentication timer. The range is 1 to 9999 seconds.
default
30
Configures the authentication server down policy.
Displays the configured re-authentication time interval value.
OmniSwitch CLI Reference Guide
802.1X Commands
June 2012