Show Aaa Authentication - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show aaa authentication

Displays information about the current authenticated switch session.
show aaa authentication
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
Use the show aaa authentication command to display authentication information about switch manage-
ment services (Telnet, FTP, console port, Secure Shell, etc.).
Examples
-> show aaa authentication
Service type = Default
1rst authentication server
2nd authentication server
Service type = Console
1rst authentication server
Service type = Telnet
Authentication = Use Default,
1rst authentication server
2nd authentication server
Service type = FTP
Authentication = Use Default,
1rst authentication server
2nd authentication server
Service type = Http
Authentication = Use Default,
1rst authentication server
2nd authentication server
Service type = Snmp
Authentication = Use Default,
1rst authentication server
2nd authentication server
Service type = Ssh
Authentication = Use Default,
1rst authentication server
2nd authentication server
page 36-106
= RadiusServer
= local
= local
= RadiusServer
= local
= RadiusServer
= local
= RadiusServer
= local
= RadiusServer
= local
= TacacsServer
= local
OmniSwitch CLI Reference Guide
AAA Commands
June 2012