Show Router Ldp Bindings Prefix - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MPLS LDP Commands

show router ldp bindings prefix

Displays the LDP bindings for a specific IP prefix.
show router ldp bindings prefix ip-prefix/mask [session ip-address[:label-space]]]
Syntax Definitions
ip-prefix
mask
ip-address
:label-space
Defaults
By default, LDP bindings are displayed for all sessions associated with the specified prefix.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the session parameter to display prefix binding information for a specific LDP router session. Note
that entering a label-space value is optional with this parameter.
Examples
->show router ldp bindings prefix 10.11.0.6/32
LDP LSR ID: 10.11.0.66
Legend: U - Label In Use,
LDP Prefix Bindings
Prefix
------------------+---------------+-------+------+-------------+---------------
10.11.0.6/32
No. of Prefix Bindings: 1
OmniSwitch CLI Reference Guide
The IP address prefix used to identify the IP network. Specify 0 for the
host bits.
The IP address mask used to identify the subnet address within the IP
address prefix.
The LDP router ID (Loopback0 IP address configured for the switch)
for a specific LDP session.
The label space ID number that the router advertises on the LDP inter-
face. This value is appended to the LDP router ID address. The valid
range is 0–65535.
N - Label Not In Use
Peer IngLbl
10.10.0.7 131069N 131069
June 2012
EgrLbl EgrIntf
--
EgrNextHop
55.55.55.77
page 48-45