Show Router Mpls Static-Lsp - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MPLS Static LSP and FRR Commands

show router mpls static-lsp

Displays static Label Switched Path (LSP) information.
show router mpls static-lsp [lsp-name | transit | terminate | count]
Syntax Definitions
lsp-name
transit
terminate
count
Defaults
By default, information for all static LSPs is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the command parameters provided to display information for a specific static LSP or to provide a
count of the number of static LSPs.
Examples
-> show router mpls static-lsp
MPLS Static LSPs (Originating)
LSP Name To
ID
------------+---------------+---------------+---------+--------------+----+----
lsp-1 10.1.1.4
1
lsp-2 10.11.0.6
2
lsp-3 5.5.5.5
3
LSPs : 3
OmniSwitch CLI Reference Guide
The name of an existing LSP.
Displays transit information for static LSPs.
Displays endpoint information for static LSPs.
Displays the total number of static LSPs.
Next Hop Out Label
Out Port
20.20.20.1* 734
n/a
20.20.20.1* 750
n/a
20.20.20.1* 750
n/a
June 2012
Up/Down Time Adm
0d 05:56:45 Up
0d 05:56:45 Up
0d 05:56:45 Up
Opr
Up
Up
Up
page 49-33