Aaa Hic Allowed-Name - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

AAA Commands

aaa hic allowed-name

Configures a list of servers that are excluded from the Host Integrity Check (HIC) process. This list identi-
fies servers that a host can communicate with during the verification process, when the host has limited
access to the network.
aaa hic allowed-name server ip-address ip_address [ip-mask subnet_mask]
aaa hic no allowed-name server
Syntax Definitions
server
ip_address
subnet_mask
Defaults
parameter
subnet_mask
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
•
Use the no form of the command to remove a server from the HIC exception list.
•
Up to four server exception entries are allowed.
•
If a host device requires access to the HIC server via a Web-based agent, make sure the Web agent
download server is added to this list.
•
Add any additional servers required for remediation to this list..
Examples
-> aaa hic allowed-name rem-srv1 ip-address 10.1.1.1
-> aaa hic allowed-name patch-srv1 ip-address 11.1.1.1
-> aaa hic allowed-name web-agent-srv1 ip-address 12.1.1.1
-> aaa hic no allowed-name rem-srv1
Release History
Release 6.3.4; command was introduced.
OmniSwitch CLI Reference Guide
The name of the server.
The IP address of the primary HIC server.
A valid IP address mask (e.g., 255.0.0.0, 255.255.0.0) to identify the IP
subnet for the download server.
default
255.255.255.255
June 2012 page 36-95