MPLS Static LSP and FRR Commands
Related Commands
configure router mpls static-lsp
configure router mpls static-lsp
to
configure router mpls static-lsp
push next-hop
show router mpls static-lsp
MIB Objects
vRtrMplsLspTable
vRtrMplsLspAdminState
OmniSwitch CLI Reference Guide
Configures a static LSP on an ingress router.
Configures the destination System IP address for the static LSP.
Pushes the specified label on to the label stack and specifies the IP
address for the next-hop router in the static LSP.
Displays static LSP configuration information.
June 2012
page 49-17