Show Policy List - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show policy list

Displays information about pending and applied policy lists.
show [applied] policy list [list_name]
Syntax Definitions
applied
list_name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Information for all rules is displayed unless a list_name is specified.
•
Use the show active policy list
on the switch.
•
The display may include any of the following characters:
character definition
+ Indicates that the policy list has been modified or has been
created since the last qos apply.
- Indicates the policy list is pending deletion.
# Indicates that the policy list differs between the pending/
applied lists.
Examples
-> show policy list
Group Name
list1
+list2
egress_list1
page 33-236
Displays only those policy lists that have been applied to the switch
configuration.
The name of the list for which you want to display information; or a
wildcard sequence of characters for displaying information about lists
with similar names. Use an asterisk (*) to indicate a wildcard character.
command to display only active policy lists that are currently enforced
From Type
cli unp
cli unp
cli egress
Enabled Entries
Yes r1
r2
Yes r3
No r1
r2
r3
OmniSwitch CLI Reference Guide
QoS Policy Commands
June 2012