Aaa Hic - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

AAA Commands

aaa hic

Globally enables or disables the Host Integrity Check (HIC) feature for the switch.
aaa hic {enable | disable}
Syntax Definitions
enable
disable
Defaults
HIC is disabled by default.
Platforms Supported
OmniSwitch 6400, 6850, 6855
Usage Guidelines
•
This command requires the configuration of the HIC server information before HIC is enabled on the
switch.
•
When HIC is enabled for the switch, configuring HIC server parameters is not allowed.
•
Note that the VLAN Stacking feature is not available when HIC is configured for the switch. These
two features are mutually exclusive in that only one of them can run on the switch at any given time.
Examples
-> aaa hic enable
-> aaa hic disable
Release History
Release 6.3.4; command was introduced.
OmniSwitch CLI Reference Guide
Enables the HIC feature for the switch.
Disables the HIC feature for the switch.
June 2012 page 36-97