Show Efm-Oam Port Remote Detail - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show efm-oam port remote detail

Displays the LINK OAM configuration and details of the related parameters of the remote port.
show efm-oam port slot/port remote detail
Syntax Definitions
slot/port
Defaults
N/A.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855.
Usage Guidelines
N/A.
Examples
-> show efm-oam port 1/1 remote detail
Remote MAC address
Remote Vendor (info): 0x15a1
Remote Vendor (oui) : XYZ
Mode
Max OAMPDU size
Config Revision
Functions Supported : loopbackSupportEventSupport
Output fields are described here:
output definitions
Remote MAC address
Remote Vendor (info)
Remote Vendor (oui)
Mode
Max OAMPDU size
Config Revision
Functions Supported
Release History
Release 6.4.2; command was introduced.
page 46-38
Specifies the slot number for the module and the physical port number
on that module (e.g. 3/1 specifies port 1 on slot 3).
: 00:30:96:fd:6b:fa,
: active,
: 1518,
: 0,
Displays the MAC address of the remote peer.
Displays the vendor number in hexadecimal of the remote peer.
Displays the Organizationally Unique Identifier (OUI) number of the
remote peer.
The state of LINK OAM mode on the remote port, active or passive.
Displays the maximum OAMPDU size that the remote LINK OAM
port can support.
Displays the configuration revision of the remote LINK OAM port.
Displays the LINK OAM functions supported by the remote port.
LINK OAM Commands
OmniSwitch CLI Reference Guide June 2012