802.1X Captive-Portal Inactivity-Logout - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

802.1x captive-portal inactivity-logout

Configures whether or not a user MAC address is flushed from the Captive Portal user table due to inactiv-
ity.
802.1x slot/port captive-portal inactivity-logout {enable | disable}
Syntax Definitions
slot/port
enable
disable
Defaults
By default, inactivity logout is disabled.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
This timer is based on the MAC address aging timer. If a user is flushed from the MAC address table due
to inactivity, the user MAC address is also flushed from the Captive Portal user table.
Examples
-> 802.1x 3/1 captive-portal inactivity-logout enable
-> 802.1x 3/1 captive-portal inactivity-logout disable
Release History
Release 6.4.4; command was introduced.
Related Commands
802.1x captive-portal retry-
count
802.1x captive-portal policy
authentication
show 802.1x captive-portal
configuration
MIB Objects
alaDot1xAuthPolicyTable
alaDot1xCPortalInactivityLogout
page 35-28
The slot and port number of the 802.1x port.
Enables inactivity logout.
Disables inactivity logout.
Configures the number of login attempts allowed before the Captive
Portal fail policy is applied to the device.
Configures a Captive Portal device classification policy for an 802.1x
port.
Displays the global Captive Portal configuration for the switch.
OmniSwitch CLI Reference Guide
802.1X Commands
June 2012