Ethoam Endpoint Priority - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

ethoam endpoint priority

Configures the priority values for CCMs and Linktrace Messages (LTMs) transmitted by a MEP.
ethoam endpoint mep_id domain {md_name | mac_address} association ma_name priority
ccm_ltm_priority
Syntax Definitions
mep_id
md_name
mac_address
ma_name
ccm_ltm_priority
Defaults
parameter
ccm_ltm_priority
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
The mep_id should be unique amid all those used by or available to the service provider in the specified
MA.
Examples
-> ethoam endpoint 100 domain MD association MA priority 6
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; mac_address parameter added.
OmniSwitch CLI Reference Guide
Specifies the Maintenance Association End Point. The valid range is
1–8191.
Specifies the domain name. For more information on the different
formats of the domain name, refer to
page 45-5.
Specifies the CFM system MAC address.
Name of the Ethernet OAM Association. Up to 48 (minus the domain
name length) characters may be used.
Priority value for CCMs and LTMs transmitted by the MEP. The valid
range is 0–7.
default
7
June 2012
ethoam domain command on
page 45-33