Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2802

Examples
-> show port-security
Legend: Mac Address: * = Duplicate Static
Mac Address: # = Pseudo Static
Port: 7/10
Operation Mode
Max MAC bridged
Trap Threshold
Max MAC filtered :
Low MAC Range
High MAC Range
Violation
Violating MAC
MAC Address
-------------------+------+-------------------
00:20:95:00:fa:5c
output definitions
Port
Operation Mode
Max MAC bridged
Trap Threshold
Max MAC filtered
Low MAC Range
High MAC Range
Violation
Violating MAC
MAC Address
VLAN
TYPE
page 40-22
: ENABLED,
:
: DISABLED,
: 00:00:00:00:00:00,
: ff:ff:ff:ff:ff:ff,
: RESTRICT
:
VLAN TYPE
1 STATIC
The module slot number and the physical port number on that module.
The Learned Port Security operation status for the port (enabled or dis-
abled). Configured through the
The maximum number of bridged MAC addresses that are allowed on
this port. Configured through the
The number of bridged MACs to learn before sending a trap. After this
number is reached, a trap is sent out for every MAC learned thereafter.
If disabled is displayed in this field, the trap threshold is not in force.
Configured through the
The maximum number of filtered MAC addresses that the LPS port can
learn. Configured through the
MAC address that defines the lower end of a MAC address range. Con-
figured through the
MAC address that defines the higher end of a MAC address range.
Configured through the
The security violation mode for the port (restrict or shutdown). Con-
figured through the
The MAC Address which caused the violation on this Port.
An individual authorized MAC address. Configured through the
port-security mac
The VLAN to which the LPS port belongs.
Indicates if the MAC address was dynamically learned or statically
configured as an authorized MAC address for the port. Dynamic MAC
addresses become configured MAC address entries after a configura-
tion save and switch reboot.
1,
5,
NULL
port-security
port-security maximum
port-security learn-trap-threshold
port-security max-filtering
port-security mac-range
port-security mac-range
port-security violation
command.
OmniSwitch CLI Reference Guide
Learned Port Security Commands
command.
command.
command.
command.
command.
command.
command.
June 2012