Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3112

output definitions
Remote IP Address
Local Hello Timeout
Remote Hello Timeout
Local Cfg Seq No
Remote Cfg Seq No
Release History
Release 6.4.2; command was introduced.
Related Commands
show router ldp discovery peer
show router ldp discovery
interface
MIB Objects
vRtrLdpHelloAdjTable
vRtrLdpPeerLdpId
vRtrLdpHelloAdjLocalLdpId
vRtrLdpHelloAdjEntityIndex
vRtrLdpHelloAdjIndex
vRtrLdpHelloAdjHoldTimeRemaining
vRtrLdpHelloAdjType
vRtrLdpHelloAdjRemoteConfSeqNum
vRtrLdpHelloAdjRemoteIpAddress
vRtrLdpHelloAdjUpTime
vRtrLdpHelloAdjLocalConfSeqNum
vRtrLdpHelloAdjLocalIpAddress
vRtrLdpHelloAdjInHelloMsgCount
vRtrLdpHelloAdjOutHelloMsgCount
vRtrLdpHelloAdjLocalHelloTimeout
vRtrLdpHelloAdjRemoteHelloTimeout
page 48-56
The IP address of the peer IP interface for this adjacency.
The Hello Timeout value configured for the local router.
The Hello Timeout value configured for the peer.
The configuration sequence number that was in the Hello received
when this adjacency started up. This configuration sequence number
changes when there is a change of configuration.
The configuration sequence number that was in the Hello received
when this adjacency started up. This configuration sequence number
changes when there is a change of configuration.
Displays the discovery status for adjacencies that are associated with a
specific LDP peer.
Displays the discovery status for adjacencies that are associated with a
specific LDP interface.
MPLS LDP Commands
OmniSwitch CLI Reference Guide June 2012