Sflow Agent - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

sFlow Commands

sflow agent

Configures a specific sflow agent IP address.
sflow agent ip <ip_address>
no sflow agent ip <ip_address>
Syntax Definitions
ip_address
Defaults
parameter
ip-address
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to delete the IP address.
•
If no IP address is configured 0.0.0.0 is used.
•
If no IP address is configured but the Loopback0 address is configured, the Loopback0 address is used.
Examples
-> sflow agent ip 192.168.1.1
-> no sflow agent ip 192.168.1.1
Release History
Release 6.3.4; command was introduced
Release 6.4.3; command was deprecated, use
OmniSwitch CLI Reference Guide
The sflow agent IP address.
default
0.0.0.0
ip managed-interface.
June 2012 page 42-3