Show Ethoam Default-Domain - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

show ethoam default-domain

Displays all the default MD information for all the primary VLANs or for a specific primary VLAN.
show ethoam default-domain [primary-vlan vlan_id]
Syntax Definitions
vlan_id
Defaults
By default, the default MD information for all primary VLANs is displayed.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Use the vlan_id parameter with this command to view information about the default MD for a specific
primary VLAN.
Examples
-> show ethoam default-domain
Primary-Vlan Mhf-creation
--------------+-------------+-----------+--------------+--------
1 mhfDefer
10 mhfDefault
-> show ethoam default-domain primary-vlan 10
Primary-Vlan Mhf-creation
--------------+-------------+-----------+--------------+--------
10
output definitions
Primary Vlan
Mhf-creation
Level
Id-Permission
Release History
Release 6.3.1; command was introduced.
OmniSwitch CLI Reference Guide
The primary VLAN ID.
Level
no-level
3
Level
mhfDefault 3
The primary VLAN ID of the default MD.
The primary VLAN ID MHF value (none, explicit, or default).
The primary VLAN level (no-level, 0–7).
The primary VLAN ID permission (none, chassid, or defer).
June 2012
Id-Permission Status
sendIdDefer true
sendIdNone true
Id-Permission Status
sendIdNone true
page 45-61