Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3261

Virtual Private LAN Service (VPLS) Commands
output definitions
Service Access Points (SAPs)
Service Id
SAP
Encap
Admin State
Oper State
Flags
Multi Svc Site
Last Status Change
Last Mgmt Change
Release History
Release 6.4.2; command was introduced.
Related Commands
show service id base
show service id labels
MIB Objects
OmniSwitch CLI Reference Guide
The following fields display configuration information for each SDP
associated with this service.
The service ID associated with the SAP. Configured through the
configure service vpls create
the configure service vpls sap create
The access port number for the SAP. Configured through the
configure service port mode access
using the configure service vpls sap create
The encapsulation type (null or dot1q) configured for the access port.
This indicates the value of the label used to identify the SAP on the
access port. Configured through the
type command.
The administrative state of this SAP (Up or Down). Configured
through the configure service vpls sap shutdown
The operational state of this SAP (Up or Down).
The conditions that affect the operational status of this SAP.
The multi-service site of which the SAP is a member.
The date and time of the last operational status change to this SAP.
The date and time of the last management-initiated change to this SAP.
Displays the basic configuration for the specified service ID and a list of
service distribution and access points associated with the service.
Displays a list of all labels that the specified service is using.
June 2012
command and bound to the SAP using
command.
command and bound to the SAP
command.
configure service port encap-
command.
page 50-87