Show Netsec Statistics - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Network Security Commands

show netsec statistics

Displays the pattern counts on ports.
show netsec [group {grp_name | all} | port slot/port[-port2]] statistics
Syntax Definitions
grp_name
group all
slot/port
port2
Defaults
By default, a list of all pattern counts is displayed.
Platforms Supported
OmniSwitch 6850, 6850E, 6855, 9000E
Usage Guidelines
To display statistics for a particular monitoring-group, specify only the group parameter.
Examples
-> show netsec statistics
Slot
Port Packet
-------+-------------+------------+--------------+-------------+------------
2/5 arp-rep
2/5 arp-req
2/5 icmp-rep
2/5 icmp-req
2/5 icmp-dnr
2/5 syn-only
2/5 syn-ack
2/5 syn-nack
2/5 fin-ack
2/5 fin-nack
2/5 rst
2/7 arp-rep
2/7 arp-req
2/7 icmp-rep
2/7 icmp-req
2/7 icmp-dnr
2/7 syn-only
2/7 syn-ack
2/7 syn-nack
OmniSwitch CLI Reference Guide
The name of the port-group (up to 16 characters).
Specifies all the monitoring-groups.
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The last port number in a range of ports that you want to configure on
the same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).
Last-In Last-Out
0 0
0 -
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 -
0 0
0 0
0 0
0 0
0 0
0 0
June 2012
Total-In Total-Out
0 0
0 -
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 -
0 0
0 0
0 0
0 0
0 0
0 0
page 38-13