Show Router Ldp Discovery - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show router ldp discovery

Displays the discovery status of the LDP Hello adjacencies between the local router and LDP peers.
show router ldp discovery [state {trying | established | down}] [detail]
Syntax Definitions
trying
established
down
detail
Defaults
By default, the discovery status for all the LDP Hello adjacencies is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the state parameter with the trying, established, or down options to display LDP adjacencies that
are in a specific state of discovery.
•
Use the detail parameter to display additional discovery information and statistics for the adjacencies.
Examples
->show router ldp discovery
LDP Hello Adjacencies
Interface Name
--------------------------------+---------------+---------------+-------+------
N/A
N/A
N/A
vlan-30
No. of Hello Adjacencies: 4
->show router ldp discovery detail
LDP Hello Adjacencies (Detail)
Peer 10.11.0.66
Local Address:
Adjacency Type:
Up Time:
Hello Mesg Recv:
Local IP Address:
Local Hello Timeout: 45,
page 48-54
Displays LDP interfaces that are trying to establish an adjacency with
peers.
Displays LDP interfaces that have established adjacencies with peers.
Displays LDP interfaces with adjacencies that are down.
Displays detailed information for LDP hello adjacencies.
Local Addr
10.10.10.5
10.10.10.5
10.10.10.5
10.10.10.5
10.11.0.6,
Targeted,
0d 03:11:09,
821,
10.11.0.6, Remote IP Address:
Peer Addr
10.11.0.6
20.1.2.3
30.1.2.3
10.11.0.6
Peer Address:
State:
Hold Time Remaining:
Hello Mesg Sent:
Remote Hello Timeout: 45,
OmniSwitch CLI Reference Guide
MPLS LDP Commands
AdjType State
Targ Estab
Targ Trying
Targ Trying
Link Estab
10.11.0.66,
Established,
34,
819,
10.11.0.66,
June 2012