Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3143

MPLS Static LSP and FRR Commands
Related Commands
configure router mpls interface
configure router mpls interface
label-map swap next-hop
configure router mpls interface
label-map pop
configure router mpls interface
label-map shutdown
show router mpls label
MIB Objects
mplsInSegmentTable
mplsInSegmentRowStatus
OmniSwitch CLI Reference Guide
Configures MPLS support on an IP interface.
Configures the outgoing label number that is swapped for the specified
incoming label number and the IP address for the next router in the
static LSP.
Configures a pop (remove) label operation to identify the router as an
egress (endpoint) router for the static LSP.
Configures the administrative status for the label mapping.
Displays the MPLS labels that are exchanged.
June 2012 page 49-7