Show Service Id Labels - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Virtual Private LAN Service (VPLS) Commands

show service id labels

Displays a list of all labels that the specified service is using.
show service id service-id labels
Syntax Definitions
service-id
Defaults
N/A.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
The service ID is a unique number that identifies a specific VPLS. All ingress and egress labels that this
service is using are displayed.
Examples
-> show service id 100 labels
Martini Service Labels
Svc Id Sdp Binding
----------+------------------+-----+---------------------+---------------------
100 10:100
Number of Bindings Found : 1
output definitions
Svc Id
SDP Binding
Type
I.Lbl
E.Lbl
Release History
Release 6.4.2; command was introduced.
OmniSwitch CLI Reference Guide
An existing VPLS ID number.
Type I.Lbl
Mesh 131069
The unique service identification number used to identify the service.
The SDP ID number associated with the service.
The SDP binding type (mesh or spoke) for the service. The spoke SDP
binding type is not supported.
The VC label used by the far-end device to send packets to the local
device for the SDP binding.
The VC label used by the local device to send packets to the far-end
device for the SDP binding.
June 2012
E.Lbl
131070
page 50-91