Chassis Management and Monitoring Commands
update lanpower
Uploads new firmware to the POE controller. Please contact your Alcatel-Lucent support representative
before using this command.
update lanpower {lanpower_num | all}
Syntax Definitions
lanpower_num
all
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
N/A
Examples
-> update lanpower 3
-> update lanpower all
Release History
Release 6.1.3; command was introduced.
Related Commands
update
OmniSwitch CLI Reference Guide
The POE unit number to update.
Updates all POE units in the switch.
Updates the versions of Uboot, FPGA, BootROM, or Miniboot.
June 2012
page 54-17