802.1X Commands
802.1x captive-portal name
Configures the name of the rediret URL that is used for accessing a public certificate.
802.1x captive-portal name cp_url_name
802.1x captive-portal no name
Syntax Definitions
cp_url_name
Defaults
By default, the name of the redirect URL is set to "captive-portal".
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use this command to change the Captive Portal redirect URL name (captive-portal) to match the
common name (cn) used by the public certificate on the switch. Matching these two names prevents a
certificate warning message caused when these names do not match.
•
Use the no form of this command to remove the configured Captive Portal redirect URL name. This
reverts the URL name back to the default of "captive-portal".
•
This feature is not supported on HTTPS sessions.
Examples
-> 802.1x captive-portal name certname
-> 802.1x captive-portal no name
Release History
Release 6.4.4; command was introduced.
Related Commands
aaa certificate-password
show 802.1x captive-portal
configuration
MIB Objects
alaDot1xAuthPolicyTable
alaDot1xCPortalRedirectString
OmniSwitch CLI Reference Guide
The name to be used for the redirect URL.
Configures the password for accessing a public certificate on the switch.
Displays the global Captive Portal configuration for the switch.
June 2012
page 35-27