Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3094

output definitions
Prefix
Peer
Type
VCId
SvcId
SDPId
IngLbl
EgrLbl
EgrIntf/LspId
EgrNextHop
LMTU
RMTU
Release History
Release 6.4.2; command was introduced.
Related Commands
show router ldp bindings
MIB Objects
page 48-38
The IP network address and mask used to identify the prefix binding.
The IP address of the LDP peer.
The type of service (V-Eth) exchanging labels through the Service
Distribution Point (SDP).
The virtual connection (VC) ID number used by each end of the SDP
tunnel to identify the VC.
The unique service identification number used to identify the service.
The SDP ID number associated with the service.
The ingress LDP label.
The egress LDP label.
The Label Switch Path (LSP) tunnel ID number (not the LSP path ID
number).
The next hop IP address for the egress label.
The local MTU number.
The remote MTU number.
The base command used to display the entire contents of the LIB for the
LDP router.
MPLS LDP Commands
OmniSwitch CLI Reference Guide June 2012