Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2797

Learned Port Security Commands
Release History
Release 6.1; command was introduced.
Release 6.4.4; discard parameter added.
Related Commands
port-security
port-security release
port-security maximum
port-security mac
port-security mac-range
port-security shutdown
MIB Objects
learnedPortSecurityTable
lpsViolationOption
OmniSwitch CLI Reference Guide
Enables or disables Learned Port Security (LPS) on the switch port(s).
Releases a port that was shut down due to an LPS violation
Specifies the maximum number of source MAC addresses that an LPS
port(s) is allowed to learn.
Configures a single authorized source MAC address for a port that
belongs to a specified VLAN.
Configures a list of authorized MAC addresses by defining a range of
addresses allowed on the port.
Configures the amount of time in minutes to allow source learning on all
LPS ports. Also, enables or disables the conversion of dynamic MAC
addresses to static MAC addresses on LPS ports.
June 2012 page 40-17