Show Ni - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Chassis Management and Monitoring Commands

show ni

Displays the basic hardware and status information for Network Interface (NI) modules currently installed
in a standalone switch or in a stack.
show ni [number]
Syntax Definitions
number
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E.
Usage Guidelines
This command may be used when logged into the switch that performs either the primary or secondary
CMM role in a stack.
Examples
-> show ni 1
Module in slot 1
Model Name:
Description:
Current mode of 10G ports:
Mode of 10G ports at next boot:stacking,
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Firmware Version:
Admin Status:
Operational Status:
Power Consumption:
Power Control Checksum:
MAC Address:
ASIC - Physical 1:
CPLD - Physical 1:
UBOOT Version :
UBOOT-miniboot Version :
POE SW Version :
C20L Upgd FailCount :
(OS6850E-XNI-U2)-> show ni
Module in slot 7
Model Name:
OmniSwitch CLI Reference Guide
The slot number for a specific NI module installed in a standalone chas-
sis or the switch number within a stack. If no slot number is specified,
information for all the NI modules is displayed.
OS9-GNI-C20L,
RJ45(Upgd)SFP,
uplink,
902434-90,
A07,
H03Q0008,
JAN 31 2007,
POWER ON,
UP,
49,
0x0,
00:e0:b1:6a:43:10,
BCM56504_B2
0010/00
6.1.5.354.R01
No Miniboot
n/a
0
OS6850E-U24X,
June 2012 page 54-39