Aaa Hic Server-Failure Mode - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

aaa hic server-failure mode

Configures the failure mode to be applied when both servers are unavailable.
aaa hic server-failure mode {hold | pass-through}
Syntax Definitions
hold
pass-through
Defaults
parameter
hold | pass-through
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
•
The server failure mode has no affect on users that have already passed HIC successfully.
•
In hold mode new users will stay in the HIC IN PROGRESS state while the servers are unavailable.
•
In pass-through mode new users will be moved to HIC PASSTHROUGH mode and treated same as
HIC SUCCESS.
Examples
-> aaa hic server-failure mode pass-through
Release History
Release 6.4.4; command was introduced.
Related Commands
show aaa hic server
MIB Objects
aaaHicConfigInfoTable
aaaHicSrvFailMode
page 36-92
Places all new users in hold mode if the HIC servers are unavailable.
Places all new users in pass-through mode if the HIC servers are
unavailable.
default
hold
Displays the HIC server configuration for the switch.
OmniSwitch CLI Reference Guide
AAA Commands
June 2012