Show Service Id Base - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show service id base

Displays basic information about the specified service, including a list of SDPs and SAPs associated with
the service.
show service id service-id base
Syntax Definitions
service-id
Defaults
N/A.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
The service ID is a unique number that identifies a specific VPLS. All information associated with the
service ID is displayed.
Examples
-> show service id 9999 base
Service Basic Information
Service Id:
Service Type:
Customer Id:
Last Status Change: 01/19/2009 13:09:36,
Last Mgmt Change:
Admin State:
MTU:
SAP Count:
Snd Flush on Fail:
Propagate MacFlush:
Service Access & Destination Points
Identifier
----------------------------------------+------------+-------+-------+----+-----
sap:1/2:100
sap:1/2:110
sap:1/2:all
sap:1/11:200
sap:8/8:300
sdp:10:100 M(10.11.0.6)
page 50-88
An existing VPLS ID number.
100,
VPLS,
1,
01/19/2009 13:09:10,
Up,
1514,
5,
Disabled,
N/A
Type
q-tag
q-tag
q-tag
q-tag
q-tag
n/a
Virtual Private LAN Service (VPLS) Commands
Vpn Id:
Oper State:
Def. Mesh VC Id:
SDP Bind Count:
Host Conn Verify:
AdmMTU OprMTU
1518 1518
1518 1518
1518 1518
1518 1518
1518 1518
1514 1514
OmniSwitch CLI Reference Guide
N/A,
Up,
100,
1,
N/A,
Adm Opr
Up Down
Up Down
Up Down
Up Up
Up Up
Up Up
June 2012