Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3214

Examples
-> configure service vpls 10 service-mtu 3000
-> configure service vpls 10 customer 10 service-mtu 3000
-> configure service vpls 10 no service-mtu
Release History
Release 6.4.2; command was introduced.
Related Commands
configure service vpls create
configure service vpls
description
configure service vpls
shutdown
configure service vpls def-
mesh-vc-id
configure service vpls send-
flush-on-failure
show service id all
MIB Objects
svcBaseInfoTable
svcId
svcMtu
page 50-40
Configures a VPLS and associates the service with a customer account.
Configures a description for the specified VPLS.
Configures the administrative status of the specified VPLS.
Configures a virtual circuit (VC) ID number used by each end of an
MPLS tunnel to identify the VC.
Enables or disables the sending of a MAC flush message when a port or
Service Access Point associated with the VPLS goes down
Displays detailed configuration information about the specified service
ID, including the SDP and SAP configuration that is associated with the
service.
Virtual Private LAN Service (VPLS) Commands
OmniSwitch CLI Reference Guide June 2012