Ethoam Default-Domain Mhf - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet OAM Commands

ethoam default-domain mhf

Configure the effective MHF value for all default domain entries with MHF value set to defer.
ethoam default-domain mhf {none | default | explicit}
no ethoam default-domain
Syntax Definitions
none
default
explicit
Defaults
Default value is none.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> ethoam default-domain mhf default
Release History
Release 6.4.3; command was introduced.
Related Commands
show ethoam default-domain
configuration
MIB Objects
dot1agCfmDefaultMdDefMhfCreation
OmniSwitch CLI Reference Guide
No MHFs can be created.
MHFs can be created.
MHFs can be created only if a MEP is created at some lower MD Level.
Defaults
Displays the values of scalar Default-MD objects.
June 2012 page 45-21