Vlan Port Authenticate - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

vlan port authenticate

Enables or disables authentication on a mobile port.
vlan port slot/port authenticate {enable | disable}
Syntax Definitions
slot/port
enable
disable
Defaults
By default, authentication is disabled on mobile ports.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
At this time, authentication is only supported on mobile ports.
Examples
-> vlan port 3/1 authenticate enable
-> vlan port 5/2 authenticate disable
-> vlan port 6/1-32 8/10-24 9/3-14 authenticate enable
Release History
Release 6.1; command was introduced.
Related Commands
vlan port mobile
vlan port 802.1x
show vlan port mobile
MIB Objects
vMobilePortTable
vMobilePortIIfIndex
vMobilePortAuthenticate
page 37-34
The slot number for the module and the physical mobile port number on
that module (e.g., 3/1 specifies port 1 on slot 3). To enter multiple slots
and ports in a single command, use a hyphen to specify a range of ports
(e.g., 3/1-16) and a space to specify multiple slots (e.g., 3/1-16 5/10-20
8/2-9).
Enable authentication on the specified mobile port.
Disable authentication on the specified mobile port.
Configures Ethernet ports as mobile ports.
Enables or disables 802.1X port-based access control on a mobile port.
Displays mobile port properties.
Port Mobility Commands
OmniSwitch CLI Reference Guide June 2012