Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2875

VLAN Stacking Commands
discard
tunnel
mac-tunnel
Defaults
parameter default
stp tunnel
gvrp tunnel
802.3ad peer
802.1x discard
802.1ab discard
amap discard
vtp discard
vlan discard
uplink discard
udld discard
pvst discard
pagp discard
oam peer
mvrp tunnel
lacpmarker peer
dtp discard
cdp discard
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to delete a UNI profile.
•
Remove any UNI profile associations with UNI ports before attempting to modify or delete the profile.
•
If a protocol is configured with the mac-tunnel parameter and no mac address has been configured, the
default Tunnel MAC address from the table above is used.
OmniSwitch CLI Reference Guide
Discards the specified PDU.
Tunnels the specified PDU across the provider network without modify-
ing the MAC address.
Changes the destination MAC address to either the configured or default
tunnel MAC address before forwarding.
Protocol DA Default
MAC Address Tunnel MAC
0180c2000000 01000ccdcdd0 -
0180c2000021 01000ccdcdd0 -
0180c2000002 01000ccdcdd0 -
- -
0180c200000e 01000ccdcdd0 -
0020da007004 01000ccdcdd0 -
01000ccccccc 01000ccdcdd0 -
01000ccdcdce 01000ccdcdd0 -
01000ccdcdcd 01000ccdcdd0 -
01000ccccccc 01000ccdcdd0 -
01000ccccccd 01000ccdcdd0 -
01000ccccccc 01000ccdcdd0 -
0180c2000002 01000ccdcdd0 -
- 01000ccdcdd0 -
0180c2000002 01000ccdcdd0 -
01000ccccccc 01000ccdcdd0 -
01000ccccccc 01000ccdcdd0 -
June 2012
Other Other
-
-
-
-
-
-
-
page 44-25