Show Router Mpls Interface - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show router mpls interface

Displays the MPLS interface configuration.
show router mpls interface [ip-intf-name] [label-map label [protect-swap [out-label]]]
Syntax Definitions
ip-intf-name
label
out-label
Defaults
By default, the configuration for all MPLS interfaces is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
Use the command parameters provided to display information for specific interfaces.
•
Fields that contain "N/A" are not supported.
Examples
-> show router mpls interface
MPLS Interfaces
Interface
-----------------------------------+-----------------+------+------+-------
vlan-20
vlan-40
vlan-22
vlan-23
Interfaces : 4
-> show router mpls interface vlan-20
Interface
-----------------------------------+-----------------+------+------+-------
vlan-20
Interfaces : 1
page 49-24
The name of an existing MPLS IP interface.
A label number. The valid range is 32–131071.
The outgoing label number for a protected LSP association. The valid
range is 32–131071.
Port-id
N/A
N/A
N/A
N/A
Port-id
N/A
MPLS Static LSP and FRR Commands
Adm Opr Te-metric
Up Up N/A
Up Up N/A
Up Up N/A
Up Up N/A
Adm Opr Te-metric
Up Up N/A
OmniSwitch CLI Reference Guide June 2012