show 802.1x device classification policies
Displays device classification policies configured for 802.1x ports.
show 802.1x device classification policies [slot/port]
Syntax Definitions
slot/port
Defaults
All device classification policies for all 802.1x ports are displayed.
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
Use the slot/port parameter to display device classification policies for a specific 802.1X port.
Examples
-> show 802.1x device classification policies
Device classification policies on 802.1x port 2/26
Supplicant:
authentication:
pass: group-mobility, default-vlan (default)
fail: block (default)
Non-Supplicant:
block (default)
Captive Portal:
authentication:
pass: default-vlan (default)
fail: block (default)
Device classification policies on 802.1x port 2/48
Supplicant:
authentication:
pass: vlan 500, block
fail: block (default)
Non-Supplicant:
block (default)
Captive Portal:
authentication:
pass: default-vlan (default)
fail: block (default)
page 35-52
The slot and port number of the 802.1x port for which you want to
display the policy configuration.
OmniSwitch CLI Reference Guide
802.1X Commands
June 2012