Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3241

Virtual Private LAN Service (VPLS) Commands
•
Disabling the SAP administrative status does not remove the SAP configuration from the router.
•
If an access port goes down, all SAPs associated with that port are operationally taken down as well.
•
A SAP does not appear operationally down when a service is shutdown, even though traffic for that
service is discarded.
Examples
-> configure service vpls 10 sap 1/2:10 no shutdown
-> configure service vpls 13 linkagg 20 no shutdown
-> configure service vpls 10 sap 1/2:10 shutdown
-> configure service vpls 13 linkagg 20 shutdown
Release History
Release 6.4.2; command was introduced.
Related Commands
configure service vpls sap create
configure service vpls sap description
configure service vpls sap trusted
configure service vpls sap static-mac
show service id sap
show service sap-using
MIB Objects
sapBaseInfoTable
sapPortId
sapEncapValue
sapAdminStatus
sapOperStatus
svcBaseInfoTable
svcId
OmniSwitch CLI Reference Guide
Configures a SAP by associating a SAP ID with a Virtual Private
LAN Service (VPLS).
Configures a description for the specified SAP ID.
Configures the trust mode for the specified SAP ID.
Configures a static MAC address entry in the forwarding data-
base for the service that is associated with the specified SAP ID.
Displays configuration information about the Service Access
Points (SAPs) associated with the specified service.
Displays the SAP configuration for the local router.
June 2012 page 50-67