AAA Commands
show aaa-device all-users
Displays the Access Guardian status of all users learned on 802.1x ports.
show aaa-device all-users [unp profile_name | policy device_policy | authentication-status [success |
fail]] [port slot/port]
Syntax Definitions
profile_name
device_policy
success
fail
slot/port
Defaults
If none of the optional parameters are specified with this command, all users learned on all 802.1x ports
are displayed by default.
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
•
Use the unp profile_name parameter to display only those users associated with a specific user
network profile.
•
Use the policy device_policy parameter to display only those users authenticated with one of the device
classification policy types. To specify which policy to use with this command, enter one of the follow-
ing types for the device_policy parameter value:
policy type
vlan
user-network-profile
group mobility
default-vlan
captive-portal
authentication
•
Use the authentication success or authentication fail parameters to display only those users that have
either passed or failed authentication.
•
Use the port slot/port parameter to display only those users learned on a specific port. Note that it is
also possible to combine this parameter with any of the other show aaa-device all-users command
parameters.
OmniSwitch CLI Reference Guide
The name of a user network profile.
The type of Access Guardian device classification policy.
Display all users that have successfully authenticated.
Display all users that have failed authentication.
The slot and port number designation for a specific switch port.
June 2012
page 36-157